Call us Now
Lines Open 10am to 2Pm

01827 767 373

Home
Products
Combi Heaters
Heating Air and Water
Water heaters
Truma Combi D4E Diesel INET-X Gen 2 Caravan Air and Water Heater Complete install Kit (not vent ducting kit) sale

Truma Combi D4E Diesel INET-X Gen 2 Caravan Air and Water Heater Complete install Kit (not vent ducting kit) sale

Name: Truma Combi D4E Diesel INET-X Gen 2 Caravan Air and Water Heater Complete install Kit (not vent ducting kit) sale
Brand: TRUMA
Price: 1405.00 GBP
Availability: InStock

Price range: £1,405.00 through £1,445.00 Inc Vat

Pickup or Delivery

Clear

Description

Technical Details

Additional Information

Reviews

Description

Black exhaust cowl vent version Next Gen -Gen 2 new model with INet-X

Truma Combi 4DE Combination Boiler KIT including flue – does not include ducting clips or vents but we do sell as a kit

The Combi D 4 E is structurally identical to the Combi D 4, the only difference being the integrated electric heating elements. The diesel version is equipped with a high-quality burner and therefore reliably heats the vehicle while driving.

Much Faster heat-up in hybrid mode
Economical battery power and diesel consumption due to more efficient combustion
2 in 1: heating the room and water heating
More independent – heat at any altitude due to integrated pressure sensor

At the camp site, simply switch over to electrical mode and run the heater with 230 V, with no need for the vehicle battery. Depending on the required output, choose between diesel, electric or mixed mode: in milder weather, set the appliance to electrical mode, on colder days to diesel mode and in extremely cold weather use mixed mode – diesel and electric heating. Through four air outlets, the warm air flows into the vehicle where it is distributed optimally. The powerful Combi D 4 E heats larger vehicles within a short time. The appliance also has a 10-litre water tank, which is heated at the same time when hot water is required. This means that you do not need an additional water heater, which saves space and weight. The Combi heater is also very compact and offers many different installation options. The Combi D 4 E is controlled and monitored with the digital Truma control panel or via the iNet X System.

Can also be operated with an empty water tank
Simple operation with the control panel or via iNet X System
Optimum warm air distribution via four air outlets
10-litre stainless steel water tank
Compact and space-saving, various installation options
Heats the vehicle and water very quickly
Uses little energy
Integrated pressure sensor automatically controls the combustion air infeed
Long service life thanks to efficient combustion control
Automatic climate control possible in combination with a Truma air conditioner
Heat Hybrid: integrated electric heating elements for additional electrical power

**Please note in addition to the installation dimensions, extra space must be provided as appropriate for the gas and water connections as well as the drain valve.

Please note that ducting is NOT included with the Truma Combi D6E but can be purchased here Please note for warranty and safety issues all appliances must be installed by a qualified engineer. In the event of a warranty claim Truma may insist on proof of installation by a qualified engineer, failure may result in warranty claims being rejected.PLEASE NOTE: we may have to ship this via a pallet delivery, if you cannot receive a pallet you will need to email us on purchase or attach not in checkout, failure to do so may result in the buyer incurring extra transport fees if they have to take off a pallet.

Technical Details

Energy sources-Diesel as per EN 590

Rated heat output in diesel mode– 1000 W / 2000 W / 3000 W / 4000 W

Rated heat output in electric mode– 900 W/1800 W

Rated heat output in mixed mode-max. 3800 W

Fuel consumption-0,1 – 0,4 l/h

Power consumption (at 12 V): operation of heater and water container-0,4 – 8,1 A

Power consumption (at 230 V)-3,9 A/7,8 A

Water capacity-10 litres

Heating time (from approx. 15 °C to approx. 60 °C): Water container-approx. 20 min.

Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033– approx. 80 min.

Weight-16,8 kg

Dimensions (L x W x H)-510 x 450 x 300 mm

Installation dimensions (minimum dimensions–additional space must be provided for the gas connection. water connections and drain valve (L x W x H) depending on the installation situation)-540 x 500 x 350 mm

Power consumption (at 12 V): heating water container-0.5 A

Air flow rate (free blowing)-max. 287 m³/h

Quiescent current-approx. 1 mA

FrostControl heating element (optional) -max. 0.4 A

Pump pressure– max. 2.8 bar

System pressure– max. 4.5 bar

Additional Information