Fiat 25Ltr Euro 4,5 & 6 GAS IT System underslung Boxer/relay

Description

If your wanting to fit a gas tank as a retrofit item to an already converted motorhome, then this is the gas tank mounting system for you.

The OEM specification GAS IT tank system has been designed to locate the 25 ltr GAS IT tank in the centre of the vehicle – between the exhaust & hand brake cable pivot, with the gas tank running left to right, which is where 99% of the UK Motorhome manufacturers who fit the GAS IT tanks fix theirs.

The specially designed GAS IT Chassis brackets for retrofit installations, don’t require insulated floors to be cut or modified as they bolt directly through the cross members which then allow our quick install feeted GAS IT tank to be fixed to the vehicle. Our feeted gas tank allow 1 man installation, and quick and easy removal should you need to in the future.   All fixings to bolt the tank mounting frame to the vehicle, and the GAS IT tank to the mounting system are also provided. 

On completion, your installation will not only comply with the relevant road vehicle gas tank mounting regulations for the UK and Europe, EN1949, R67, NCC C.o.P. 306 but it will exceed their technical requirements.

If you want to reduce your vehicles weight, then we also offer the option of using a smaller 20 ltr GAS IT tank or if you want to go slightly bigger with your gas capacity then we also do a 30 ltr GAS IT system, which have their own seperate listing on our shop,

As all GAS IT tanks are fitted with automatic excess flow valves in the inlet and outlets of the tank, It complies with the EN1949 regulations which states you do not need to fit a crash sensing regulator to run your gas whilst moving ( assuming your gas appliance system its approved to be used whilst vehicle is in motion).

In line with the N.C.C. CoP 306 and also the gas tank manufactures requirements, you must protect your GAS IT tank when mounting underneath the vehicle from mechanical damage caused by stones and road debris. A good quality rubberised underbody spray to help protect and prolong your gas tanks life, and the associated mounting system, from Stone chips and future rust must be applied on install.

We sell an underbody spray HERE for this application. Please make sure the rubberised coating on the tank is checked at least once a year and recoated in any areas that have been washed away by general road wear.

Failure to protect the tank against stone chips and mechanical damage on install will invalidate any warranty on the tank and mounting system.

The GAS IT OEM specification gas tank kit comes complete with:-

Please make sure this tank 100% fits the location and your age of vehicle ( and that there is space in the location your fitting it which is not taken up by other pre installed items )