Description
This tank is a special order product and the tank and valves are exempt from our normal returns procedure and thus cannot be returned.
Please make sure this tank 100% fits the location and vehicle you have before purchase as special order items are exempt from normal returns under UK government guidelines.
If your not sure it 100% fits we ask that please do not purchase this item & contact us first.
If your wanting to fit a gas tank as a retrofit item to an already converted Citroen motorhome, then this is the gas tank mounting system for you.
The metal tank mounting brackets will come in bare steel and are not painted red as per the picture. Under current codes of practice these brackets and tanks need undersealing
Gas its in house developed OEM specification GAS IT tank system has been designed to locate the 20 ltr GAS IT tank in the centre of the vehicle – between the exhaust & hand brake cable pivot, with the gas tank running left to right, which is where 99% of the UK Motorhome manufacturers who fit the GAS IT tanks fix theirs.
GAS ITs Chassis brackets for retrofit installations, don’t require insulated floors to be cut or modified as they bolt directly through the cross members which then allow our quick install feeted GAS IT tank to be fixed to the vehicle. The feeted gas tank allow 1 man installation, and quick and easy removal should you need to in the future. All fixings to bolt the tank mounting frame to the vehicle, and the GAS IT tank to the mounting system are also provided.
On completion, your installation will not only comply with the relevant road vehicle gas tank mounting regulations for the UK and Europe, EN1949, R67, NCC C.o.P. 306 but it will exceed their technical requirements.
If you want to go slightly bigger with your gas capacity then we also do a 25 ltr or 30 ltr GAS IT system, which have their own seperate listing on our Webshop,
Options available to select in this tank listing include the smaller 20 ltr gas tank, various fill point options and colours, underbody tank stone chip protection spray, remote LED contents gauge system, stainless pigtail and regulator options.
As all GAS IT tanks are fitted with automatic excess flow valves in the inlet and outlets of the tank, It complies with the EN1949 regulations which states you do not need to fit a crash sensing regulator to run your gas whilst moving ( assuming your gas appliance system its approved to be used whilst vehicle is in motion).
In line with the N.C.C. CoP 306 and also the gas tank manufactures requirements, you must protect your GAS IT tank when mounting underneath the vehicle from mechanical damage caused by stones and road debris. A good quality rubberised underbody spray to help protect and prolong your gas tanks life, and the associated mounting system, from Stone chips and future rust must be applied on install.
We sell an underbody spray on our webshop for this application via the install tool and accessories category. Please make sure the rubberised coating on the tank is checked at least once a year and recoated in any areas that have been washed away by general road wear.
Failure to protect the tank against stone chips and mechanical damage on install will invalidate any warranty on the tank and mounting system.
Special Order Product – Tank not Returnable.
Citroen 20Ltr Euro 4, 5 & 6 GAS IT System
Consists of:-
1 x VT-001-F-S-C – 200 x 20ltr vapour tank with feet and pre-fitted valves/airbox at customer request.
Special Order Product – Tank not Returnable.
————————————————————————————————-
8 x ACCS-112 – Penny washer
4 x ACCS-113 – M10 x 25mm steel bolt
4 x ACCS-114 – M10 x 1.5 Nyloc nut
4 x ACCS-144 – M10 x 120mm long bolt
4 x ACCS-145 – M10 Internal diameter 100mm long steel tube
4 x ACCS-146 – M10 Steel washer
1 x FP-004 – Angled 8mm UK full bayonet
1 x FP-015-Black – 70mm BLACK Fill box
2 x TF-061 – X250 Chassis Mounting Frame Brackets supplied in bare steel and not painted red.
1 x STICK-001 – White Body protector ring
1 x STICK-019 – 100m100 tank warming sticker
1 x S002 – Dragon Products Leak Detector Spray 400ml
1 x SPR-001 – GAS IT Tank & Underbody Coating Spray
2.5 x AUX-024 – 2.5mtr Lightweight hose
1 x AUX-005 – 8mm to Thermoplastic
1 x AUX-030 – STR SAE/8mm Fitting
Reviews
There are no reviews yet.